Heat sink recovery equipment heat sink copper and aluminum separator is through shredder, vertical crusher, magnetic separator, air separator, gravity separator and a series of equipment combination application, recovery heat sink copper, iron, aluminum.
Process flow: the heat sink is put into the shredder, the shredded material is separated from iron by the magnetic separator, and then the remaining material enters into the crushing system, and the crushed material is separated from copper and aluminum by the sorting system. The equipment is equipped with covering dust removal equipment, the whole recycling process is clean and pollution-free.
Heat sink recovery equipment performance: copper separation rate >98%, iron separation rate >99%, aluminum separation rate >98%
Process:
Double shaft shredder, this is a low speed high torque crushing equipment. It can extrude, tear and crush strip materials with uneven length and width up to 5CM into the sink. The shredded materials can be uniformly put into the subsequent crushing equipment to improve the crushing efficiency and increase the output.
Vertical crusher is a set of efficient material crushing system, which can produce impact and shearing force on the material input through the high-speed rotation of the blade, so as to crush the material and provide uniform material size for subsequent sorting.
Air separator, air separator can separate most of the material aluminum, improve the efficiency of the whole system.The air flow separator is equipped with a fan. After the crushed material enters the air flow separator, under the effect of its own density and wind force, the lighter aluminum will fall to the farther place inside the air flow separator, thus separating most of the aluminum in the material.
According to the specific gravity of the material and the different suspension speed, under the action of air flow and vibration, the material has certain movement characteristics of the inclined plane, through the air flow to separate the material.When the material falls into the sorting machine, under the action of inclined airflow, the material with lower specific gravity will be kept in the upper layer after automatic classification, while the material with higher specific gravity will be kept in the lower layer. Under the action of excitation force, the two media with different specific gravity will flow in different directions, thus realizing the separation of copper and aluminum.
评论
发表评论